Dany Tools
CART: 0 CHECKOUT
 

 

PRODUCT DETAIL
 Move the mousse over the image.
The color of the garments can be different depending on your monitor.
CODE: 47.660X
Magnetic Tumbler Cmf 400 230V
 

OUR PRODUCTS
  ABRASIVES
  SETTING/ENGRAVING
  BURS
  CASTING
  HAND TOOLS
  BENCH TOOLS
  TWIST DRILLS
  MACHINES/MOTORS
  GAUGES
  LOUPES & MAGNIFIERS
  STAMPS
  SOLDERING TOOLS & SUPPLIES
  SAWBLADES & SAWFRAMES


Magnetic Finishing presents itself as the pinnacle of methods to efficiently burnish and polish small non-ferrous metals. With media as small as .010 in diameter and .250 in length, these stainless steel pins are able to work in areas such as undercuts, recesses, slots, etc., where no previous method has been found suitable. Centrifugal Magnetic Finishing is quiet by comparison to many other forms of finishing. Typically, on soft non-ferrous metals, the finishing cycle can be as low as 30 minutes. This alone assures faster turnaround time on parts when compared to any other method. Centrifugal magnetic tumbling as an automated process, addresses the most intricate and detailed parts imaginable in finishes where others fail. It should be noted that on large, smooth or flat surfaces the finish will appear frosted and a slight buffing or a run in a dry finisher is recommended. The machine has a direct, fan-cooled drive. The magnetic disk is made up of many powerful magnets that are precisely placed in a cast disk. The alternating polarity is constantly changing, thereby allowing the media to move freely in a liquid solution that constantly changes its make-up. This, combined with cent


 


 

 

Copyright © 2015 Dany Tools. All Rights Reserved.